Typical Pyplok Training Certificate

Hydraulic Flushing Services And Equipment

High Pressure Testing

Canglobal offers pressure testing services for low and high pressure testing.

We can test with liquid, nitrogen, helium or air with a pressure range from a few psi to 30,000psi.

Our certification is for proof testing, leak testing of newly fabricated systems or systems that are in service.

Canglobal’ shydraulics and pneumatics testing is suited for applications in wide range of industries. We are constantly expanding our services.

Contact us with your needs for a customized pressure test program.

Offshore Platforms and Industrial Flushing Services

Newly fabricated systems or systems that are in-service.

Canglobal's flushing is designed as a part of the lifelong maintenance program, and preparations for newly fabricated systems should be included in the design phase.

Our flushing guidelines meet the following international standards, API, ASTM, ISO, etc.

Reduce costly shut downs or costly upgrade or a complete modification’s due to contamination build up.

It is more cost-efficient to perform periodic cleaning such as a proactive flushing service program.

Reduce costs, Save time and money, It is often possible to perform a flush while system is in operation.

Contact Canglobal and speak with our flushing expert to discuss how we can save you time and money.

Chemical Flushing


Filtration / Oil / Environmental Chemical Flushing Service
Offshore Platforms , FPSO, Vessels, Cranes, Turbines, Well Control Panels, etc.
 
Canglobal can achieve oil cleanliness levels: ISO 10/ 7/ 0 or well below NAS 0. Our technology can achieve unprecedented cleanliness. During the Commissioning or Maintenance phase to ensure that systems are clean before start-up.

Pre filtration and flushing is a well proven and very effective cleaning method, oil and environmental chemicals can circulate though the system, by means of turbulent flow at a set target cleanliness and or temperature. During the circulation the oil and or Environmental Chemical or oil is filtered and particles and contamination removed. The final product will be a clean system according to the predetermined specifications of the specific equipment and or machinery.

Our filtration and flushing services are monitored and documented through a laboratory calibrated onsite particle counter. This guarantees the customer reel time results.


Facility Commissioning
 
Before a facility can begin operation, any protective coatings, fabrication and installation debris or scales present are often removed.

If this was not done either the efficiency of production would be lessened or the plant itself could be damaged.

One example is the removal of rust and coatings from high pressure gas compressor suction pipework.
 
Environmental Chemical
 
Innovative and cost effective solutions are what we offer to our customers.

With our Environmental Flushing Solution we are able to reduce chemical and schedule waste, ultimately reducing operational and project costs. Our standards focus on the environment and health and safety.

Services
  • Online / Offline Filtration
  • Oil Flushing
  • Environmental Chemical Flushing
  • Moisture Removal
  • Particulate Removal
Application:
  • Tubing
  • Oil Flushing
  • Pipes
  • Pipe systems
  • Umbilicals
  • Heat Exchangers
Benefits:
  • Trouble free start-up of systems
  • Clean systems extend bearing lifespans
  • Continuous operations
Deliverables:
  • Clean and reliable piping systems
  • Experienced personnel and fit for purpose equipment
  • Particle and water content analyses by use of onsite laboratory equipment
  • Documented process

Filtration Services

Our Filtration Services contribute to greater efficiency and profitability of your business.

Our Services, consist of utilizing the latest filtration technology in the market.

With our products and techniques we are able to achieve unprecedented cleanliness of your lubricants and internal components even while your machines are operational.
 
Achieve Oil cleanliness levels: ISO 10/ 7/ 0 or well below NAS 0
 
Our filtration systems have the unique ability to remove particulate of ANY size, right down to sub micron sized particulate.

Our filtration systems will operate with any semi-conductive or non-conductive fluid, lubricant, or oil, within broad temperature and viscosity limits. Our systems ability to remove the pre-cursors of oxidation by-products, will prevent, and over time, remove existing tar and Varnish deposits. Reduce down time, equipment life extension, fluid life extension.

PROBLEM: Water H2O and Particulate Contamination
   
There has always been a problem with condensation in the bulk storage of fuels and oils. Water and particulates have found ways to enter even through the tightest sealed tanks.

The water condenses from humid air trapped inside the tank, but it also can enter through bad seals, vents and breathers. Traditionally removing this water or moisture has been a problem.  Many costly measures have been used to try and solve this problem. No matter how water enters your tanks, it will find its way into your equipment.  When water ends up in your engine, hydraulic system or machinery it will cause costly damage.

In order to eliminate water from your hydrocarbon streams in an effective and efficient way, it would be necessary to utilize one of CanGlobal’s many portable and stationary filtering systems. This technology allows you to combine water and particulate filtration into one simple step.  

Contact us today for further information of our technology and services.

Stop Throwing Your Oil Away!

Our Filtration Services contribute to greater efficiency and
profitability of your business.

Our  Services, consist of utilizing the latest filtration technology in the market.

With our products and techniques we are able to achieve
unprecedented cleanliness of your lubricants and internal
components even while your machines are operational.

Achieve Oil cleanliness levels: ISO 10/ 7/ 0 or well below NAS 0

Our filtration systems have the unique ability to remove particulate of ANY size, right down to sub micron sized particulate.
Our filtration systems will operate with any semi-conductive or non-conductive fluid, lubricant, or oil, within broad temperature and viscosity limits. Our systems ability to remove the pre-cursors of oxidation by-products, will prevent, and over time, remove existing tar and Varnish deposits.
Reduce down time, equipment life extension, fluid life extension.

PROBLEM: Water H2O and Particulate Contamination
 
 There has always been a problem with condensation in the bulk storage of fuels and oils.
Water and particulates have found ways to enter even through the tightest sealed tanks.
The water condenses from humid air trapped inside the tank, but it also can enter through bad seals, vents and breathers.
Traditionally removing this water or moisture has been a problem. 
Many costly measures have been used to try and solve this
problem.
No matter how water enters your tanks, it will find its way into your equipment. 
When water ends up in your engine, hydraulic system or
machinery it will cause costly damage.
In order to eliminate water from your hydrocarbon streams in an
effective and efficient way, it would be necessary to utilize one of CanGlobal’s many portable and stationary filtering systems.
This technology allows you to combine water and particulate
filtration into one simple step.  
Contact us today for further information of our technology and
services.

Laboratory Services

 















Switch To Desktop Version